State of the art 12V 20Ah Lithium Iron Phosphate (LiFePO4) battery. Built-in DC power plug and Anderson Powerpole connector. The most versatile battery of the 12V lineup with a large capacity. Serious applications in surveillance and scientific instrumentation, this battery can do it all.
Please note that due to federal battery regulations, this item may only be shipped via Ground.
Please note that this battery should only be charged using a LiFePO4 compatible charger (at 14.6VDC). Not a charger for SLA batteries.
The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-1220A is a state of the art 12V 20Ah battery. The BLF-1220A is the most versatile battery of the Bioenno Power 12V lineup and offers large capacity (matching and exceeding a 12V 40Ah SLA) and extreme performance (2000+ charge cycles, 5-10+ years service life, up to 90% capacity discharge) it embodies the Bioenno Power advantage: ultimate reliability in the smallest form factor of its class. With serious applications in surveillance and scientific instrumentation in addition to being one of the most demanded Amateur Radio batteries, this battery can do it all. No EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet. This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 2A with a DC Plug, sold separately.
Includes built-in PCM (protection circuit module) which provides internal cell balancing and management, protection from over-current, under-voltage (over-discharge), over-voltage and short circuiting, and has integrated charging circuitry.
Capacity: 20 Ah
Case Type: PVC Pack
Charge Connector: DC Plug (5.5/2.1mm)
Discharge Connector: Anderson Powerpole (15/30/45A compatible)
Maximum Continuous Discharge Current: 40A (make sure your electrical load consumes less than 40A)
Maximum Power Delivered to Load at 12V: 480 Watts (12V x 40A = 480 Watts)
Maximum Peak Discharge Current: 60A (3 sec)
Dimensions: 6.5 in. x 4.31 in. x 3.3 in. (160 mm x 108 mm x 83 mm)
Manufactures Warranty: 2 Years
AC-to-DC Charger Specifications (sold separately)
Input Voltage: 110VAC/220 VAC
Output Voltage: 14.6VDC
Connector: DC Plug (5.5/2.1mm)