Description
Super PWRgate PG40S is a 12 volt backup power system that can supply up to 40 amperes continuously from either a Power Supply or a Battery, and can also charge the battery with its high performance charger.
A Super PWRgate is a 12 volt backup power system that can supply up to 40 amperes continuously from either a Power Supply or a Battery, and can also charge the battery with its high performance charger.
Connected equipment will instantly switch to battery during a power blackout or power supply failure. No glitches.
The circuit isolates the battery and power supply from each other. Voltage drop is less than 0.3 volts at 20 A.
To keep the battery fully charged and ready for use, the Super PWRgate has a built-in four-stage battery charger with selectable current rates of 1, 4, 7 or 10 amperes.
The circuit is optimized for use with GELLED & AGM type batteries, but will keep flooded lead acid and marine type batteries near full charge as well.
Features
- A Super PWRgate is a 12 volt backup power system rated at 40 amperes continuous from either a Power Supply or a Battery.
- The Super PWRgate has a built-in four-stage battery charger with selectable current rates of 1, 4, 7 or 10 amperes.
- Connected equipment will instantly switch to battery during a power blackout or power supply failure.
- Uses two 80 ampere Schottky diodes as an OR-Gate to isolate the battery and power supply from each other.
- Forward voltage drop of less than 0.3 volts at 20 A.
- Optimized for use with GELLED & AGM type batteries, but will keep flooded lead acid and marine type batteries near full charge as well.
- Measures 1.64" x 3.9" x 5" and uses Anderson PowerPole connectors.
Specifications
Maximum Voltage | 18 Volts DC |
Maximum Current | 40 Amperes |
Circuit | Diode OR-Gate |
Diodes | Two Schottky 80 Ampere, 20 Volt |
Voltage Drop | 0.25 Vdc at 1 Ampere 0.5 Vdc at 40 Ampere |
Charging Circuit | Charging regulator IC Field Effect Pass Transistor Schottky Diode Fuse switched for 1,4,7 or 10 Amperes (±5%) maximum Peak voltage limit: 13.8 (Gelled), 14.2 (AGM),(±2%) Peak voltage limit set via internal jumper to GELLED or AGM Peak voltage terminate point: 0.1 Maximum current Float Voltage: 13.5 volts (±2%) |
LEDs | Green - Indicates charger is "ON" Red - Indicates peak "PK" charge voltage Yellow - Indicates Float "FL" voltage |
Connectors | Anderson Powerpole connectors, 40A |
Size | 5.25 x 3.90 x 1.65 in, 13.4 x 9.9 x 4.2 cm |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.